|
|
|
|
 |
|
|
|
|
Items you will need:
- The decal you want to use
- A squeegee
- Masking Tape
- Window Cleaner
- A rule or tape measure
- A spray bottle containing warm water with a drop of soap
- A pin or needle
Step 1
Clean the surface area where the sticker is going to be applied. Use glass cleaner or rubbing alcohol.
It is best to apply these stickers at temperatures between 50°F – 70°F
Step 2
Position your sticker on the surface you intend it to be applied to. Put a piece of tape, (masking tape), on either upper corner. Use a measuring tool of some kind to square it up.
Step 3
Apply masking tape the full distance across the top, half on the sticker, and half on the surface.
- This is where you can use the warm soapy water if you want. Why you life the sticker, backing and transfer tape, spray a fine mist all over the area you are working on.
Step 4
Lift the sticker, backing and transfer tape all together. Slowly remove the wax paper backing while holding on to the sticker and transfer tape. Be VERY careful not to let the sticker fall into itself, you have to keep it spread out and taut. Also be sure the hinged area does not come off the transfer tape or the surface.
Step 5
Again, holding the sticker and transfer tape taut with one hand, start from the top and middle with your squeegee, pressing firmly work outward from top/middle to top/right then top/middle to top/left. Then squeegee width down/middle to the right and then to the left. Do not skip any area as you are working your way down or you will get bubbles or even wrinkles that you may not be able to get out.
Step 6
Go back over the entire area even more firmly now, try to go the same way you did originally.
Step 7
Remove the hinge masking tape and squeegee upwards over that area the masking tape was covering.
- If you used the soapy water you can now make sure there are no bubbles, wrinkles and you can even straighten it a bit. Be sure the last thing you do before removing the tape if using the soapy water is SQUEEGEE FROM THE MIDDLE OF ENTIRE STICKER OUT UNTIL ALL BUBBLES, WRINKLES AND WATER ARE OUT.
Step 8
Now remove the transfer tape, slowly starting from one corner pulling away from the surface while keeping the transfer tape you are pulling on as close to the surface area as you can. Doing this minimizes the chances of pulling up the sticker with the transfer tape.
- If you used the soapy water slowly dry with paper towels and let set for 10 or 15 minutes until the water you sprayed is all evaporated.
Step 9
With window cleaner spray the entire area and gently clean. After several days you should be able to wash with a cloth, soap and water - not to hard - and go through Car Washes, etc...
|
|
 |
Special Products for Home Page,Coming Soon!!
|
|
|
|
|
|
|
 |
 |
|
Rebel Highway is a place we all seek out. A stretch of road where you and your machine
can tear down the asphalt and not worry about speed traps. If you seek the Rebel
Highway, be it two wheels or four, ol’school or cutting edge, being Dot approved
is not something you worry about. We have what you need to trick out you and your
ride. The best decals on the market from Lethal Threat Designs. Each sticker is
cut to the exact shape of the design, screen printed with fade resistant inks and
artwork from the top tattoo, airbrush, and Kustom Kulture artists. Motorcycle Tank
Protectors for the sport bike crowd with killer graphics. If you really want your
ride to make a statement, we have motorcycle, car, trailer and truck graphics..
If your on the Rebel Highway, you own that favorite leather or denim jacket, step
it up a notch with our highly detailed embroidered patches. Add some Kool to your
wardrobe with our screen printed full color black t-shirts. Gals check out our fitted
tops. Doesn’t matter what ride or drive, choppers, bobbers, sport bikes, cruisers,
hot rods, imports, trucks, big riggs, rat rods, muscle cars or what ever keeps you
moving, take a ride on the Rebel Highway! |
|
|